Choose the best alternative to fill in the gaps in each of the following sentences.
Date: 2015-10-07; view: 829.
Match the words and their meanings by placing a proper letter on each blank.
Here are some words that you often use. Write synonyms for each of them on the blank. Take the words from the box.
| well-known to find quick whole to do gap article to set up to make better to construct get bigger |
1 to build
2 to make
3 fast
4 to improve
5 popular
6 to discover
7 entire
8 to establish
9 item
| 1 to pick (up) | a to collect and keep for future use |
| 2 to fit in | b to take hold of or lift |
| 3 to punch (on) | c to make holes on surfaces |
| 4 to turn on (off) | d be in a suitable relation |
| 5 to store | e to start (on, off) |
1. The horizontal universal … have a swiveling table for cutting helices.
a machines
b devices
c equipment
2. Planer-type millers are used only on the … work.
a heaviest
b harder
c better
3. Plain are produced by inserting the cutter into the bore to be milled, feeding it to depth radially, making a sweeping … about the bore, and withdrawing first radially and then axially.
a cut
b rise
c bind
4. In planetary milling machines the … is stationary on the bed or clamped to the tailstock while the cutter rotates.
a equipment
b workpiece
c tools
5. The plain machines are used for jobbing or … work, the universal for toolroom work.
a production
b output
c manufacturing
6. The fixed-bed machines have a … mounted in a head dovetailed to and sliding on the face of the column.
a spring
b spindle
c broach
7. Rotary-type millers usually have … table on which fixtures carrying the workpiece are mounted.
a a rotating
b a threading
c a rolling
8. In hardening, they are often heated in a vertical … furnace and quenched by being hung in an air blast furnished from small holes along the side of pipes placed vertically about the broach.
a conical
b cylindrical
c rectangular
9. Broaches of complicated … are likely to warp during the heat-treating process.
a triangle
b workpiece
c shape
10. The pitch should be as coarse as possible to provide ample chip …, but at least two teeth should be in contact with the workpiece at all times.
a durability
b clearance
c cuttering