Accumulation in Reservoir Beds

Date: 2015-10-07; view: 466.

The porosity (volume of pore spaces) and permeability (capacity for transmitting fluids) of carrier and reservoir beds are important factors in the migration and accumulation of oil. Most petroleum accumulations have been found in clastic reservoirs (sandstones and siltstones). Next in number are the carbonate reservoirs (limestones and dolomites). Accumulations of petroleum also occur in shales and igneous and metamorphic rocks because of porosity resulting from fracturing, but such reservoirs are relatively rare. Porosities in reservoir rocks usually range from about 5 to 30 percent, but all available pore space is not occupied by petroleum. A certain amount of residual formation water cannot be displaced and is always present.

Reservoir rocks may be divided into two main types: (1) those in which the porosity and permeability is primary, or inherent, and (2) those in which they are secondary, or induced. Primary porosity and permeability are dependent on the size, shape, and grading and packing of the sediment grains and also on the manner of their initial consolidation. Secondary porosity and permeability result from postdepositional factors, such as solution, recrystallization, fracturing, weathering during temporary exposure at the Earth's surface, and further cementation. These secondary factors may either enhance or diminish the inherent conditions.